A Practical Guide to Glycol Chiller Systems: Design, Control and Installation Explained

Understanding Glycol Chiller Systems

Glycol chiller systems are widely used across UK industries where precise temperature control is required. From food and beverage production to pharmaceutical manufacturing and industrial processing, these systems provide stable and controlled cooling using a solution of glycol blended with water to transfer heat.

Unlike standard water chillers, glycol chillers use a glycol-based solution that lowers the freezing point of the circulating fluid. This makes them suitable for applications operating below 0°C or installations with outdoor pipework exposed to cold weather.

At a fundamental level, glycol chiller systems remove heat from a process and transfer it away through a refrigeration circuit. The cooled glycol solution is then circulated to the load, where it collects process heat and returns to repeat the cycle.

How a Glycol Chiller System Works

Effective system design ensures consistent output and reduced energy consumption. Core components typically include:

• Refrigeration compressor


• Heat rejection condenser


• Evaporator heat exchanger


• Metering device


• Glycol reservoir and pump


• Control panel

Within the evaporator, the refrigeration cycle extracts thermal energy from the secondary fluid. The chilled solution is then distributed to the application, where it absorbs heat before returning.

A typical glycol chiller system diagram shows the separation between the primary refrigeration loop and the secondary glycol circuit. The refrigeration loop manages heat removal, while the glycol loop delivers cooling to the equipment or product. Accurate schematics are valuable for installation, servicing and fault finding.

The Control Panel: Managing Performance and Safety

The glycol chiller system control panel acts as the operational centre of the system. Modern panels typically include:

• Digital temperature controllers


• Integrated logic controllers


• Pressure protection cut-outs


• Circulation pump management


• Alarm notifications


• Remote monitoring capabilities

The control panel manages compressor cycling, supervises operating conditions and ensures safety limits are maintained. Many systems also log performance data to support service planning and operational records.

In facilities requiring precise cooling, reliable control minimises fluctuations that might compromise process stability.

Installing a Glycol Chiller System Control Panel

Proper glycol chiller system control panel installation is essential for consistent performance and regulatory compliance. Key factors include:

• Electrical compliance – Connections must align with UK wiring regulations and include suitable isolation and circuit protection.


• Environmental positioning – Installation should avoid damp conditions and excessive ambient temperatures.


• Commissioning procedures – Post-installation checks must include sensor accuracy, alarm testing and pump sequencing confirmation.

Commissioning ensures the unit operates in line with the original glycol chiller system design specifications.

Key Factors in System Design

Effective glycol chiller system design begins with accurate assessment of the cooling load. Engineers evaluate:

• Required temperature range


• Hydraulic design and circulation requirements


• External temperature influences


• Redundancy or backup requirements


• Allowance for capacity growth

Oversized systems increase energy consumption, while undersized units struggle to maintain setpoints. Load calculations must consider peak demand and operational cycles.

Fluid selection also plays a role. Food-related industries often favour propylene glycol for safety reasons, whereas ethylene glycol may be selected for industrial environments requiring improved heat transfer efficiency.

Additional considerations such as insulation standards, pump capacity and exchanger design influence stability, efficiency and lifespan.

Where Glycol Cooling Is Used

Glycol chiller systems support numerous sectors across the UK, including:

• Breweries and distilleries


• Dairy and food processing facilities


• Pharmaceutical production environments


• Precision equipment temperature control


• Manufacturing and moulding operations


• Refrigerated storage applications

For example, in beverage production, chillers maintain fermentation temperatures and cool storage tanks. In manufacturing settings, they prevent overheating during continuous machinery operation.

Protecting System Performance

Routine maintenance supports efficient operation and reduced downtime. Typical servicing tasks include:

• Testing fluid concentration and condition


• Assessing circulation components


• Cleaning condenser coils


• Verifying control panel settings


• Monitoring refrigerant pressures

Over time, glycol can degrade or become contaminated, reducing heat transfer efficiency. Regular testing helps maintain optimal performance.

When correctly designed, installed and maintained, glycol chiller systems can provide reliable service for many years.

Common Queries About Glycol Chiller Systems

What is the typical glycol percentage?

The required percentage depends on freeze protection and operating temperature, commonly ranging from 20–40%.

Can a glycol chiller be installed outdoors?

Outdoor installation is possible when the system is designed for external conditions.

How does a glycol chiller differ from a water chiller?

Unlike water-only systems, glycol-based chillers resist freezing and support sub-zero applications.

Is remote access available?

Many contemporary glycol chiller system control panels integrate with BMS platforms or secure remote systems.

How often should glycol fluid be tested?

Fluid condition should be reviewed regularly based on system workload.

Where are they most commonly used?

Industries requiring stable and low-temperature control frequently depend on glycol-based systems.

Final Considerations

Glycol chiller systems deliver reliable and consistent temperature control across a broad range of industrial and commercial applications. From accurate load calculation and correct commissioning through to routine servicing, every stage affects efficiency and longevity.

Whether planning a new installation or upgrading existing equipment, working with experienced specialists ensures compliance with UK standards and operational requirements. For technical advice and tailored solutions, visit the relevant specialists at the Newsome glycol chillers page to review professionally engineered systems.